Every storage and home lift we sell that publishes a full factory spec sheet, side by side. The figures below are taken straight from the manufacturers' own published specifications — nothing is estimated, and where a manufacturer does not publish a figure we leave it blank rather than guess.

If you are choosing between two of these, the four figures that usually decide it are lifting capacity, rise height, the storage clearance you end up with underneath, and whether the overall footprint fits your bay.

Specifications for 7 storage and home lifts, side by side.
SpecificationTEC 8000S Lift | TEC LiftsTEC8000SFrom $3,999.00View & BuyTEC-8000-WRA Lift | TEC LiftsTEC8000 WRA$4,650.00View & BuyTEC 8000XH Lift | TEC LiftsTEC8000XHFrom $4,299.00View & BuyTEC 9000XH Lift | TEC LiftsTEC9000XH$6,149.00View & Buy9k Standard CL4P9S-SR  | 4 Post Lift - ChallengerChallengerCL4P9S$6,268.07View & Buy9k extended height CL4P9X-SR | 4 Post Lift - ChallengerChallengerCL4P9X$6,556.35View & Buy9k extended height and width CL4P9W-SR | 4 Post Lift - ChallengerChallengerCL4P9W$6,704.84View & Buy
The figures that decide the sale
Lifting Capacity 8,000 lbs. 8,000 lbs. 8,000 lbs. 9,000 lbs. 9,000 lbs. 9,000 lbs. 9,000 lbs.
Rise Height (top of runway) 74.8" 74.8" 82.3" 85" 73.25" 85.5" 85.5"
Storage Clearance (under runways) 70" 70" 78" 81" 67.75" 80" 80"
Column Height 86" 86" 94" 97" 7' .5" (84.5") 8' .5" (96.5") 8' .5" (96.5")
Footprint — what has to fit in the bay
Overall Length (with ramps) 207.3" 207.3" 222.5" 239" 209.5" 233.5" 233.5"
Overall Length (without ramps) 175.5" 175.5" 190.7" 197" — — —
Overall Width 103.5" 109.4" 109.4" 123" 112.25" 112.25" 127.25"
Clearance Between Columns 94.4" 100.3" 100.3" 111.5" 95" 95" 110"
Length Between Columns — — — — 160.5" 184.75" 185.75"
Drive-Thru Width 80" 87.2" 87.2" 99" — — —
Min. Recommended Bay Size — — — — 11' x 22' 11' x 22' 14' x 22'
Runways
Runway Width 18.7" 18.7" 18.7" 20" 20" 20" 20"
Runway Length 165.5" 165.5" 180.5" 188.5" — — —
Runway Height (floor to top) 4.3" 4.3" 4.3" 4.80" 7" 7" 7"
Clearance Between Runways 37.2" 42.2" 42.2" 39.5" 38" 38" 38"
Outside Runway to Outside Runway 74.8" 80.7" 80.7" 79" — — —
Max. Wheelbase — — — — 155" 179" 179"
Power & mechanicals
Power / Voltage 115V – 20 Amp / 1PH 115V – 20 Amp / 1PH 115V – 20 Amp / 1PH 115V – 20 Amp / 1PH 115v/230v 115v/230v 115v/230v
Motor — — — — 1HP/2HP 1HP/2HP 1HP/2HP
Speed of Rise — — — 90 sec. 120/60 s 120/60 s 120/60 s
Locking Positions 10 10 12 11 — — —
Base Plate Size 10" x 12" 10" x 12" 10" x 12" — — — —
Approach Ramps Steel Aluminum Steel — — — —
Ship Weight 1,545 lbs. / 1,695 lbs. 1,545 lbs. / 1,695 lbs. 1,805 lbs. 2,354 lbs. — — —
Certification
ALI / ETL Certified No No No No Yes Yes Yes

How to read this table. A dash (—) means the manufacturer does not publish that figure, not that the lift lacks the feature. Hover a specification name to see exactly what each manufacturer calls it on their own spec sheet. Column heights are published by Challenger in feet and inches; the inch equivalent is shown in brackets.

TEC figures are taken from the TEC 8000 Series and 9000XH Series brochures. Challenger figures are as published by the factory at challengerlifts.com. The TEC lifts are not ALI certified.

Not sure which one fits your garage?

Tell us your ceiling height and what you want to park, and we will tell you which of these lifts works in your space — and which of them will not.

Ask Us Which One Fits Shop TEC Series Shop Challenger